Can you Remove Tiny taps with an Electro Arc machine?
You can use Electro Arc’s IQ precision disintegrating head to remove taps as small as #0. If you are a watchmaker you may have broken tiny taps that you are…
Read more

You can use Electro Arc’s IQ precision disintegrating head to remove taps as small as #0. If you are a watchmaker you may have broken tiny taps that you are…
Read moreWe’re following up on the original article 10 ways you can use Electro Arc Metal Disintegrators with 10 more ways you can use these metal disintegrating machines! Electro Arc metal…
Read moreBroken bolts causing downtime have long been the source of frustration. Collectively, a broken bolt can cost hundreds of thousands of dollars between repairing the machine, scrapping parts, employee pay,…
Read moreD.C. cutting is direct current cutting, which is a naturally occurring process that moves metal from a positive pole (+) to a negative pole (-) when current flow is initiated…
Read moreFirst of all, what is an Electrode? An electrode is an electrical conductor, Electro Arc electrodes, formerly referred to as Disintrodes, are hollow tubing made of graphite, copper, or Molybdenum.…
Read moreElectro Arc’s 3-S portable metal disintegrator is featured below. You do not need dielectric fluid to use Electro Arc machines, just coolant. The 3-S is easy on your pockets and…
Read moreAre you wondering what the best way to remove broken drill bits from metals is? Electro Arc has been providing high-quality broken tap, drill, stud, and bolt removal EDM /…
Read moreThe following is a transcription of the above video. Please reach out to us here with any questions or concerns. Hi and welcome to Electro ARC. Today we’re going to…
Read moreUsing A Broken Tap Remover On A Rivet Did you know that you can use Electro Arc tap removers to remove broken rivets? You can see a demonstration of our…
Read more