Exciting news for our customers! As of July 1st, 2019 Stillion Industries has acquired Electro Arc Manufacturing. This is good news for our customers. Alongside Stillion Industries, Electro Arc now has state-of-the-art ISO9001:2015 compliant machining and on site engineering. With…
Our broken bolt, drill, and tap removal technology is the most cost-effective and precise method out on the market. Our EDM – MDM machines precisly remove the broken off bolt, drill and or tap without damaging your valuable equipment. The…
Imagine you’re on the production line working on a large manufacturing machine. Everything seems to be running smoothly, until crack, a tap has broken off in the machine. A person breaks the tap not the machine. Unable to retrieve the…
How to remove a broken tap quickly. Electro Arc’s small EDM Tap removal tool is featured below. No dielectric fluid required. It is economical and convenient. Our metal disintegrators remove broken taps and drills without damage or coming into contact…
Wondering the best way to remove broken drill bits from metals? Electro Arc has been providing high quality broken tap, drill, stud, and bolt removal EDM / MDM machines since 1947. Our technology safely removes the broken drill in seconds…
At Electro Arc we know that time is important to you. However, how often can you get things done faster without sacrificing quality? Not very often. This is not the case here. We have been providing the world with the…
Molybdenum Electrodes Are Different These Electrodes are different and are usually less expensive. Moly electrodes have a higher melting temperature which means that it will break down or erode more of the broken tool, tap, or drill rather than the…
Below is a transcription of the above video. If you have any questions about our broken drill, tap, and spark erosion machines then contact us on our contact page. In this video we are going to demonstrate how to restore…
The following is a transcription of the above video. Please reach out to us here with any questions or concerns. Hi and welcome to Electro ARC. Today we’re going to be demonstrating our DC direct current output disintegrating transformer which…
Using A Broken Tap Remover On A Rivet You can view more videos on our Youtube channel. Please reach out here for additional information or if you have any questions on our machines. Below is a transcript of the above…
