10 Ways you can use Electro Arc Metal Disintegrators

When you think of a metal disintegrator you probably think of removing broken bolts.  Electro Arc metal disintegrators have a variety of uses.  Disintegrating hard metal is easy with our machines!  A minute arc causes the disintegration process at predetermined intervals.  These arcs burn microscopic pieces of your work metal.

Here are just 10 ways you can use your Electro Arc metal disintegrator to save time and money by accomplishing in minutes what would have taken you hours or days to do in the past.

Broken Taps

You can use your Electro Arc metal disintegrator to remove broken taps from any material. A machine with an Arc*er head will remove taps between #6 – 1 1/4″.  If you need to remove between #0 and 2″ or bigger, the IQ head is built to disintegrate the largest and smallest taps.  If you will be disintegrating carbide, look into our DC metal disintegrators!

Broken Studs

You can remove broken studs  with an Electro Arc metal disintegrator.  Use one of our DC models to remove larger diameter studs (2.5″ – 6″) As illustrated below:

Broken Drills

Don’t waste hours removing broken drills.  Save money and salvage your parts.

Broken Reamers

When reamers break they can be especially hard to remove.  Use your metal disintegrator to remove broken reamers with no damage to your part.

Cut Round and Shaped Holes

Your metal disintegrator can be used to cut round holes without annealing the surrounding metal regardless of the rockwell hardness!

Cut shaped holes in hardened metals using shaped electrodes.

Preserve the thread when you remove large broken taps by disintegrating out the core.  Our magnetic pick set helps you remove the sections in no time!

You can remove small diameter drills from expensive parts saving you from salvaging expensive machine parts.

When you have a frozen stud our metal disintegrators can still save you time and money by removing the broken stud, screw or bolt with two cuts.

You may have wiped out half of the thread on your broken bolt trying to remove it, broken easy-out in the hole, made a mess trying to weld out a broken stud, or totally galled the thread when you were trying to remove that broken stud.  If you really want an easy solution for removing broken studs and screws, we have your solution!  An alternative to the “two cuts” method illustrated above?  The square hole.  When you disintegrate a square hole in your broken studs you can use an socket wrench to remove them!

Save your broken end mills!  As any machine shop knows, broken end mills can shut down operations costing your company more money per hour than you can afford!  Our Metal disintegrators will save your broken end mill and save you money immediately!

An Electro Arc metal disintegrator is an investment some companies use to provide metal disintegration services for time sensitive jobs!  Most of our customers need the metal disintegrator to continue operations this is especially true for power stations, petro-chemical works, oil equipment, offshore installation ships and general process industries.  In these industries every minute is worth thousands of dollars.  If you have key piece of equipment, that needs repair due to a broken fastener you need it now!  Easy out will not cut it in these settings!

Applications go well beyond just broken stud and bolt removal.  you can cut slots 1mm wide, and 10mm deep in heavy test pieces for calibration or deep cuts through seized clevis pins.  Orientation is never a problem with our versatile disintegrating heads!

Are you looking for more applications for your metal disintegrator?  Check out our new post 10 More Ways you Can use Electro Arc Metal Disintegrators.

How to Remove Broken Drill Bit From Metal

Are you wondering what the best way to remove broken drill bits from metals is? Electro Arc has been providing high-quality broken tap, drill, stud, and bolt removal EDM / MDM machines since 1947. Our technology safely removes the broken drill in seconds without causing any damage to your part. Our spark erosion and metal disintegration technology can save you thousands of dollars by not causing damage to expensive parts. Please, take a moment to review how our spark eroders work.

Examples of disintegration with an Electro Arc metal disintegrator

Get the Job Done Right with Electro Arc

Electro Arc’s unique process disintegrates only the center out of a broken tap or drill leaving its threads intact.  You can use this process to cut square or round shapes to back out studs or bolts or to remove large studs with a series of cuts.  Emboss identification on rolls of steel, bore, and counterbore holes.  You can reclaim expensive parts and provide immediate repairs on all types of equipment.  Thus you will experience fewer production overruns and late deliveries.

Model 2-SQT for removing broken drills:

  • Unlimited disintegration potential in a compact, versatile package 
  • For HSS tooling removal
  • Remove taps, drills, and studs from 0-80 to 2” (24.5 mm) in a single pass
  • The 36-inch maxi feature provides ultra-rigid support for absolute positioning

Electro Arc