Electro Arc
  • 0

    No products in the cart.

Tag Electro Arc Arc-er Head

Comparing Electro Arc disintegrating heads

Electro Arc’s Arc-er portable disintegrating head

Arc-er Head in action

The Arc-er head is ideal for portable use. You can use it with portable or tabletop metal disintegrators. You can also use the Arc-er head with machine tools like CNC machines, Bridgeport, Radial drill, lathe or mill, and directly on the workpiece. This head operates at any angle. You can remove broken tooling from .079 to 3/4 inches in a single pass.

The Arc-er head is standard with the following machines:

2-S
2-SB
2-SE
2-SET
2-SA
3-S

In September of 1998, the Arc-er head was introduced as an upgrade for the previous LBH head. Although similar in design and use, the Arc-er head features an LED current monitoring system to assist you in maintaining optimal use of your Arc-er head and saves on electrode consumption.

You can also purchase the ultra-compact mini-mag 800 lb fixture or the portable magnetic base fixture which attaches to ferrous surfaces and provides 3000 lb holding power for use with your arc-er head. You can expect reliable heavy-duty service with your Arc-er Head which is designed to remove taps, drills, and studs up to 1″ diameter.

Electro Arc’s IQ Precision Disintegrator Head

IQ head on our test stand

The IQ precision disintegrator head is a high-performance head engineered for heavy-duty use. You can use this head horizontally or vertically. Thermal protection prevents any potential damage from overheating. You can use the IQ head to remove taps, bolts, drills, and fasteners up to 1″ in a single pass.

The IQ head is a standard feature for the following metal disintegrators:

2-SQT

2-DV

2-DVQ

2-DVT

2-DVQT

1-SV

1-SVT

1-SVQ

1-SVQT

HK-6V

The IQ head body enables smooth movement with 9″ of manual or automatic travel. This head is ideal for small taps from 0-80 or extremely large taps such as 2-inch taps or larger bolts such as 1 1/4-inch bolts and up. If you need to disintegrate carbide, look at the Servo head below:

Electro Arc’s Servo Disintegrator Head

Servo Head test burn

A high-performance disintegrating head, engineered for heavy-duty precision use. You can use this with electrodes from .020 inches to 1-inch diameter. You can use this machine to take out broken tooling including taps, bolts, drills, fasteners, etc. from 2# diameter in a single pass. Larger diameters are handled with multiple passes.

The Servo DC disintegrator head is standard on all of our DC machines.

We offer the full-size servo disintegrating head and a mini servo disintegrating head. The servo head is specially designed for heavy-duty use and comes standard with our most powerful machine, the Bolt Eater. This head disintegrates broken bolts 2 inches or larger. The mini servo DC disintegrator head is ideal for portable disintegration giving you ease of use at all angles and in small spaces.

Not sure what disintegrating head is best for your application? Try out our Machine Builder!

What’s the difference between the LBH head and Arcer Disintegrating Head?

In November of 1966, Electro Arc announced the LBH head. A new fast-cutting disintegrator head for removing broken drills and taps. The model LBH disintegrating head incorporated a bearing-mounted, hardened shaft that increases cutting speed by providing extra rigidity. Simple construction reduced the amount of maintenance this head would need to the bare minimum. This head provided you with the option of disintegrating at any angle. You could disintegrate with electrodes from .010 up. At the time, this head was standard for Electro Arc metal disintegrators including the 3-S and 1-S.

The LBH head on portable disintegrator holding fixture

The LBH head is now obsolete. In September of 1998, Electro Arc released its replacement the Arc-er head. Now standard on a number of our portable and tabletop machines, the Arc-er head can also be used in a number of machine configurations. This upgraded head features a current monitor for ease of use. This feature allows you to easily determine when to adjust your disintegration.

The Arc-er head was introduced in 1998

Disintegrating head applications allow you to easily use the Arc-er head with a number of our metal disintegrators. Check out the configurations for your Arc-er head below. You can use the Arc-er Head with a number of machines in your shop. You can also use the Arc-er head directly on your workpiece. We also offer magnetic fixtures for use with your Arc-er disintegrating head.

Electro Arc